E-type OEM B33A
B33a E-type OEM Boss
This boss has a PCD of 77.8mm (from top to bottom hole - 12o'clock & 6 o'clock fixing holes)
The B33a is an OEM boss available in polished or black finish and is suitable for the following cars:
- Jaguar E-type (XKE) for a XKE OEM wheel OR a Custom XKE wheel
- Series 1 (the boss may not be needed if you have the original boss and it is not riveted to the wheel.
- Series 1.5 (the boss is not be needed if you have the original boss)
- Series 2 (the boss is not be needed if you have the original boss)
- Series 3 (you will need the boss as the original is riveted to the wheel) You will also need to make a small modification on a series 3 - to make the horn work you will need to solder a small (17.5mm) brass screw to the rod that works the horn.
- Boss Finish: Black or Polished