Mahogany Rim T-spoke E-Type OEM
CLASSIC REPLACEMENT WHEELS
Jaguar XKE E-type OEM T-spoke Mahogany
(ON THESE MAHOGANY WHEELS, WE ONLY HAVE LIMITED MANUFACTURING CAPABILITY AVAILABLE. PLEASE EMAIL FOR INFORMATION: email@example.com) We do not have 15" Mahogany OEM wheel - alternative is the 15" XKE laminate wheel with rivets:
The PCD of a 6-bolt e-type OEM wheel is 77.8mm (from 12o'clock to 6'oclock fixing holes)
Original specification Jaguar E-type wheels for Series 1, 1.5 and 2. This wheel fits onto the original OEM boss. But we can supply an OEM boss if required.
For some Series 1 (not all) and all Series 3 E-types, a new OEM wheel must also have a new OEM boss, because the steering wheel may be riveted to the boss - Please check.
Please note series 3, E-types also require very slight modification to horn control wiring (the horn contact will need to be lengthened by 17.5mm), we suggest soldering a small brass screw to the rod that works the horn (not supplied).
Please note: the colour of stain can vary on different internet browsers.
OEM steering wheels are supplied with the Moto-Lita stamp on the reverse of the wheel.
*Wood rim wheels are slightly smaller in diameter than the size shown, this is due to the sanding of the rim during manufacture.
- Size: 15" (38cm) or 16" (40.5cm)
- Rim: Mahogany
- Spoke Finish: Polished
- Fitting: 6 Bolt or OEM or OEM XKE (6-bolt)
- Design: Flat
- Spoke Style: Holes or XKE OEM T Spokes
- Pattern: 3-spoke